aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-02use correct line continuationazpHoward Butler
2020-03-02typolandHoward Butler
2020-03-02be explicit with SQLITE for conda/osxHoward Butler
2020-03-02add osx builderHoward Butler
2020-03-02or curlHoward Butler
2020-03-02libtiff is not a declared dependency of PROJ7 in conda-forgeHoward Butler
2020-03-02add azp windows builder based on conda-forge and 2017Howard Butler
2020-03-02more installsHoward Butler
2020-03-02yml typoHoward Butler
2020-03-02install cmake/gcc/etcHoward Butler
2020-03-02specify CXX and CCHoward Butler
2020-03-02remove variablesHoward Butler
2020-03-02yml formattingHoward Butler
2020-03-02minimal azp configHoward Butler
2020-03-02Fix bad copy&replace pattern on HEALPix and rHEALPix projection names. ↵Even Rouault
Affects output of 'proj -l'
2020-03-01Update github_version in sphinx configKristian Evers
2020-03-01Bump version numbers in preparation for 7.1.0Kristian Evers
2020-03-01Update docs in preparation for 7.0.0 releaseKristian Evers
2020-02-29createOperations(): fix wrong pipeline generation with CRS that has ↵Even Rouault
+nadgrids= and +pm= (#1998) Fixes issue reported at https://lists.osgeo.org/pipermail/gdal-dev/2020-February/051749.html The generated pipeline assumes that the input coordinates for the grid transformation were related to the non-Greenwich based datum, so we must compensate for that and add logic to go back to Greenwich.
2020-02-28Avoid crash when running against SQLite3 binary built with ↵Even Rouault
-DSQLITE_OMIT_AUTOINIT (fixes #1932) (#1997)
2020-02-28Formatting fixEven Rouault
2020-02-27Fix warnings of latest cppcheck masterEven Rouault
2020-02-27Doc: Add missing projection property tables (#1992)Chatziargyriou Eleftheria
2020-02-27Make tests independent of proj-datumgridEven Rouault
Fixes #1984 - Copy BETA2007.gsb, MD, alaska, conus, ntf_r93.gsb, ntv1_can.dat grids from proj-datumgrid to data/tests. - Replace a couple uses of nzgd2kgrid0005.gsb in tests by ntf_r93.gsb - Add downsampled/subsetted versions of egm96_15.gtx as tests/egm96_15_downsampled.gtx and ntv2_0.gsb as tests/ntv2_0_downsampled.gsb This results in a few changes in expected results - Simpify travis/install.sh due to less configurations to test This results in a hopefully acceptable increase of the proj-X.Y.Z.tar.gz from 2.9 to 5.3 MB
2020-02-27proj_create_crs_to_crs(): avoid potential reprojection failures when ↵Even Rouault
reprojecting area of use to source and target CRS Was found with https://github.com/OSGeo/PROJ/pull/1989 when using cs2cs EPSG:4937 EPSG:31258+5778 - We do not need to do vertical transformation in that context. This failed here because the Austrian grids have nodata value outside of the shape of Austria, so the edges of the grids are mostly nodata values. - And we should avoid grid-based transformations too.
2020-02-27Merge pull request #1989 from rouault/register_austrian_height_gridsEven Rouault
Database: register 4 height Austrian grids from https://github.com/OSGeo/PROJ-data/pull/13 + handle 'Vertical Offset by Grid Interpolation (BEV AT)' method
2020-02-27Merge pull request #1987 from nyalldawson/flat_polar_quarticEven Rouault
Support conversion of Flat_Polar_Quartic projection method
2020-02-26Database: register 4 height Austrian grids from ↵Even Rouault
https://github.com/OSGeo/PROJ-data/pull/13 + handle 'Vertical Offset by Grid Interpolation (BEV AT)' method
2020-02-26Database: update to EPSG v9.8.7Even Rouault
2020-02-26Support conversion of Flat_Polar_Quartic projection methodNyall Dawson
2020-02-25Merge pull request #1983 from rouault/fix_1982Even Rouault
createOperations(): be robust to a GeographicCRS having a wrong ID attached to it (fixes #1982)
2020-02-25createOperations(): be robust to a GeographicCRS having a wrong ID attached ↵Even Rouault
to it (fixes #1982)
2020-02-25CompoundCRS::create(): reject combinations of components not allowed by ISO ↵Even Rouault
19111
2020-02-24createOperations(): keep height/z value in Helmert transform between 3D CRSEven Rouault
This is the consequence of a private email thread between me, Joel Haasdyk and Roger Lott. I initially raised that the GDA2020 technical manual advertized the Helmert transformation between GDA94 to GDA2020 to be a 3D one, with example of a test point where ellipsoidal heights where modified. It appears this was intended. The corresponding record in EPSG uses the EPSG:9607 "Coordinate Frame rotation (geog2D domain)" method between the 2D geographic CRS of GDA94 and GDA2020. From the email exchange, it appears that there's a lot of legacy explaining that Helmert transformations are registered only between 2D CRS, which doesn't mean that when applied to the corresponding 3D CRS, the change in ellipsoidal height should be discarded. Related to that, the EPSG database, while it has methods flagged "(geog3D domain)" never uses them. So... this changeset slightly ammends PROJ behaviour to ignore the "(geog2D domain)" flag, but only consider the dimensionality of the source & target CRS. However, for a EPSG transformation, those are always 2D CRS, hence introduce the use3DHelmert_ hack when we know that ultimately the 'real' source & target CRS are 3D. I wouldn't be surprised if in more complex pipeline the above logic would be lacking. But it fixes at least simple transformations.
2020-02-24pj_hgrid_apply(): change error code when no grid match to PJD_ERR_GRID_AREA ↵Even Rouault
(refs #1973)
2020-02-24Fix mapping of Vertical_Near_Side_Perspective (fixes #1965)Nyall Dawson
2020-02-24Expose proj_context_is_network_enabled() in C APIEven Rouault
2020-02-24Merge pull request #1968 from wonder-sk/slovakia-jtsk-ntv2-masterEven Rouault
Add alternative grid for JTSK - JTSK03 transform (EPSG:8364)
2020-02-23Add alternative grid for JTSK - JTSK03 transform (EPSG:8364)Martin Dobias
The definition of EPSG:8364 uses NADCON method for horizontal grid (.las/.los files) but this format is not supported by PROJ. UGKK (Slovak Geodetic and Cartographic Institute) provides NADCON .las/.los files here: https://www.geoportal.sk/files/gz/slovakia_jtsk03_to_jtsk.zip Additionally UGKK also provides the same grid file in NTv2 format: https://www.geoportal.sk/files/gz/slovakia_jtsk03_to_jtsk_ntv2.zip So let's add the NTv2 file the grid_alternatives table so that PROJ can automatically pick it up...
2020-02-22Merge pull request #1962 from mwtoews/sharedMike Taves
CMake: rename BUILD_LIBPROJ_SHARED to BUILD_SHARED_LIBS
2020-02-21Doc: advertize lat_0 for proj=nsperEven Rouault
2020-02-21Add support for creating coordinates operations using Compact Miller,Nyall Dawson
Times and Vertical Near Side Perspective projections
2020-02-21Add support for creating coordinates operations using Natural Earth/Natural ↵Nyall Dawson
Earth 2 projection
2020-02-21Add support for creating coordinates operations using ESRI:53079 (patterson) CRSNyall Dawson
2020-02-21test_network.cpp: fix test failures on big endian archs (fixes #1958)Even Rouault
2020-02-21Switch build configuration logic from DISABLE_TIFF to ENABLE_TIFFMike Taves
* Autotools interface should be the same, but different ./configure --help * For CMake, the option should be -DENABLE_TIFF=NO (default is YES) * Use TIFF_ENABLED and CURL_ENABLED variables, based on option and outcome * Reword some messages and add hints * Move -DTIFF_ENABLED and -DCURL_ENABLED from global add_definitions() to target_compile_definitions(), which is recommended practice * Minor spelling and style consistency around SQLITE_VERSION check
2020-02-21CMake: rename BUILD_LIBPROJ_SHARED to BUILD_SHARED_LIBSMike Taves
* Deprecate BUILD_LIBPROJ_SHARED, but still use it as an alias for now * Rename BUILD_LIBPROJ_SHARED_DEFAULT to BUILD_SHARED_LIBS_DEFAULT * Keep previous defaults (UNIX as shared and Windows as static) * Remove PROJ_LIBRARY_TYPE, since add_library() uses BUILD_SHARED_LIBS
2020-02-20Fix wrong byte-swapping for NTv2 grids affecting master after RFC4 work ↵Even Rouault
(fixes #1938) And add testing of both little-endian and big-endian NTv2 files
2020-02-20Add/update description for pkg-config and CMakeMike Taves
Ignore WARNING: 'proj.pc.in' seems to ignore the --datarootdir setting
2020-02-20CMake: rename ENABLE_LTO to ENABLE_IPOMike Taves
* Deprecate ENABLE_LTO, but still use it as an alias for now * Plan to remove ENABLE_LTO by PROJ 8.0 * Use CMake 3.9 logic to check feature and set property
generated by cgit v1.2.3 (git 2.25.1) at 2026-01-30 17:16:22 +0000