test/gie/builtins.gie: remove unused parameters

1 files changed, 133 insertions, 133 deletions

diff --git a/test/gie/builtins.gie b/test/gie/builtins.gie
index 3397090c..a70baba5 100644
--- a/test/gie/builtins.gie
+++ b/test/gie/builtins.gie
@@ -416,7 +416,7 @@ Aitoff
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=aitoff   +R=6400000    +lat_1=0 +lat_2=2
+operation +proj=aitoff   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -497,7 +497,7 @@ Apian Globular I
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=apian   +a=6400000    +lat_1=0 +lat_2=2
+operation +proj=apian   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -516,7 +516,7 @@ August Epicycloidal
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=august   +a=6400000    +lat_1=0 +lat_2=2
+operation +proj=august   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -535,7 +535,7 @@ Bacon Globular
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=bacon   +a=6400000    +lat_1=0 +lat_2=2
+operation +proj=bacon   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -554,7 +554,7 @@ Bipolar conic of western hemisphere
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=bipc   +ellps=GRS80  +lat_1=0.5 +lat_2=2
+operation +proj=bipc   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -577,7 +577,7 @@ accept  -200 -100
 expect  -73.034496627 17.246832896
 
 -------------------------------------------------------------------------------
-operation +proj=bipc   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=bipc   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -606,7 +606,7 @@ Boggs Eumorphic
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=boggs   +a=6400000    +lat_1=0 +lat_2=2
+operation +proj=boggs   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -699,7 +699,7 @@ Cal Coop Ocean Fish Invest Lines/Stations
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=calcofi   +ellps=GRS80  +lat_1=0.5 +lat_2=2
+operation +proj=calcofi   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -722,7 +722,7 @@ accept  -200 -100
 expect  -62.486322854 87.980755945
 
 -------------------------------------------------------------------------------
-operation +proj=calcofi   +R=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=calcofi   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -766,7 +766,7 @@ Cassini
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=cass   +ellps=GRS80  +lat_1=0.5 +lat_2=2
+operation +proj=cass   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -789,7 +789,7 @@ accept  -200 -100
 expect  -0.001796631 -0.000904369
 
 -------------------------------------------------------------------------------
-operation +proj=cass   +R=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=cass   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -851,7 +851,7 @@ Central Cylindrical
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=cc   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=cc   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -881,7 +881,7 @@ Equal Area Cylindrical
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=cea   +ellps=GRS80  +lat_1=0.5 +lat_2=2
+operation +proj=cea   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -904,7 +904,7 @@ accept  -200 -100
 expect  -0.001796631 -0.000904369
 
 -------------------------------------------------------------------------------
-operation +proj=cea   +R=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=cea   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -982,7 +982,7 @@ Compact Miller
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=comill   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=comill   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1011,7 +1011,7 @@ Craster Parabolic (Putnins P4)
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=crast   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=crast   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1040,7 +1040,7 @@ Denoyer Semi-Elliptical
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=denoy   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=denoy   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1059,7 +1059,7 @@ Eckert I
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=eck1   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=eck1   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1088,7 +1088,7 @@ Eckert II
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=eck2   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=eck2   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1117,7 +1117,7 @@ Eckert III
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=eck3   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=eck3   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1146,7 +1146,7 @@ Eckert IV
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=eck4   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=eck4   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1175,7 +1175,7 @@ Eckert V
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=eck5   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=eck5   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1204,7 +1204,7 @@ Eckert VI
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=eck6   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=eck6   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1234,7 +1234,7 @@ Equidistant Cylindrical (Plate Carree)
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=eqc   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=eqc   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1331,7 +1331,7 @@ Euler
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=euler   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=euler   +ellps=GRS80  +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1354,7 +1354,7 @@ accept  -200 -100
 expect  -0.001796279 -0.000898316
 
 -------------------------------------------------------------------------------
-operation +proj=euler   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=euler   +a=6400000    +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1385,7 +1385,7 @@ lat_0=(0)
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=etmerc   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5 +zone=30
+operation +proj=etmerc   +ellps=GRS80 +zone=30
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1414,7 +1414,7 @@ Fahey
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=fahey   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=fahey   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1443,7 +1443,7 @@ Foucaut
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=fouc   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=fouc   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1466,7 +1466,7 @@ accept  -200 -100
 expect  -0.001796631 -0.000898315
 
 -------------------------------------------------------------------------------
-operation +proj=fouc   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=fouc   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1495,7 +1495,7 @@ Foucaut Sinusoidal
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=fouc_s   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=fouc_s   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1524,7 +1524,7 @@ Gall (Gall Stereographic)
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=gall   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=gall   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1553,7 +1553,7 @@ Geocentric
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=geocent   +ellps=GRS80  +lat_1=0.5 +lat_2=2
+operation +proj=geocent   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1 0
@@ -1570,7 +1570,7 @@ accept  6373287.27950247        222560.09599219 110568.77482092
 expect  2 1 0
 
 -------------------------------------------------------------------------------
-operation +proj=geocent   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=geocent   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 
@@ -1582,7 +1582,7 @@ Geostationary Satellite View
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=geos   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +h=35785831
+operation +proj=geos   +ellps=GRS80 +h=35785831
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1605,7 +1605,7 @@ accept  -200 -100
 expect  -0.001796631 -0.000904369
 
 -------------------------------------------------------------------------------
-operation +proj=geos   +R=6400000    +lat_1=0.5 +lat_2=2 +h=35785831
+operation +proj=geos   +R=6400000 +h=35785831
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1645,7 +1645,7 @@ Ginsburg VIII (TsNIIGAiK)
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=gins8   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=gins8   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1665,7 +1665,7 @@ General Sinusoidal Series
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=gn_sinu   +a=6400000    +lat_1=0.5 +lat_2=2 +m=1 +n=2
+operation +proj=gn_sinu   +a=6400000 +m=1 +n=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1797,7 +1797,7 @@ Goode Homolosine
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=goode   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=goode   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1947,7 +1947,7 @@ Hatano Asymmetrical Equal Area
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=hatano   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=hatano   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1976,7 +1976,7 @@ HEALPix
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=healpix   +ellps=GRS80  +lat_1=0.5 +lat_2=2
+operation +proj=healpix   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -1999,7 +1999,7 @@ accept  -200 -100
 expect  -0.001798641 -0.000766795
 
 -------------------------------------------------------------------------------
-operation +proj=healpix   +R=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=healpix   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -2029,7 +2029,7 @@ rHEALPix
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=rhealpix   +ellps=GRS80  +lat_1=0.5 +lat_2=2
+operation +proj=rhealpix   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -2052,7 +2052,7 @@ accept  -200 -100
 expect  -0.001798641 -0.000766795
 
 -------------------------------------------------------------------------------
-operation +proj=rhealpix   +R=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=rhealpix   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -2100,7 +2100,7 @@ Interrupted Goode Homolosine
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=igh   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=igh   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -2200,7 +2200,7 @@ Kavraisky V
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=kav5   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=kav5   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -2223,7 +2223,7 @@ accept  -200 -100
 expect  -0.001996259 -0.000808483
 
 -------------------------------------------------------------------------------
-operation +proj=kav5   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=kav5   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -2252,7 +2252,7 @@ Kavraisky VII
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=kav7   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=kav7   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -2553,11 +2553,11 @@ expect  failure errno lat_larger_than_90
 ===============================================================================
 Lagrange
 	Misc Sph, no inv.
-	W=
+	W= lat_1=
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=lagrng   +a=6400000 +W=2   +lat_1=0.5 +lat_2=2
+operation +proj=lagrng   +a=6400000 +W=2   +lat_1=0.5
 -------------------------------------------------------------------------------
 tolerance   0.1 mm
 accept      2 1
@@ -2622,7 +2622,7 @@ Larrivee
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=larr   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=larr   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -2641,7 +2641,7 @@ Laskowski
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=lask   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=lask   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -2909,7 +2909,7 @@ Lee Oblated Stereographic
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=lee_os   +R=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=lee_os   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3003,7 +3003,7 @@ McBryde-Thomas Flat-Polar Sine (No. 1)
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=mbt_s   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=mbt_s   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3026,7 +3026,7 @@ accept  -200 -100
 expect  -0.001959383 -0.000823699
 
 -------------------------------------------------------------------------------
-operation +proj=mbt_s   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=mbt_s   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3055,7 +3055,7 @@ McBryde-Thomas Flat-Pole Sine (No. 2)
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=mbt_fps   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=mbt_fps   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3084,7 +3084,7 @@ McBride-Thomas Flat-Polar Parabolic
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=mbtfpp   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=mbtfpp   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3113,7 +3113,7 @@ McBryde-Thomas Flat-Polar Quartic
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=mbtfpq   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=mbtfpq   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3142,7 +3142,7 @@ McBryde-Thomas Flat-Polar Sinusoidal
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=mbtfps   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=mbtfps   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3172,7 +3172,7 @@ Mercator
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=merc   +ellps=GRS80  +lat_1=0.5 +lat_2=2
+operation +proj=merc   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3195,7 +3195,7 @@ accept  -200 -100
 expect  -0.001796631 -0.000904369
 
 -------------------------------------------------------------------------------
-operation +proj=merc   +R=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=merc   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3234,7 +3234,7 @@ Miller Oblated Stereographic
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=mil_os   +R=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=mil_os   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3263,7 +3263,7 @@ Miller Cylindrical
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=mill   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=mill   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3293,7 +3293,7 @@ Space oblique for MISR
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=misrsom   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +path=1
+operation +proj=misrsom   +ellps=GRS80 +path=1
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3316,7 +3316,7 @@ accept  -200 -100
 expect  127.761567257 -0.001735150
 
 -------------------------------------------------------------------------------
-operation +proj=misrsom   +R=6400000    +lat_1=0.5 +lat_2=2 +path=1
+operation +proj=misrsom   +R=6400000 +path=1
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3345,7 +3345,7 @@ Mollweide
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=moll   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=moll   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3375,7 +3375,7 @@ Murdoch I
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=murd1   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=murd1   +ellps=GRS80  +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3398,7 +3398,7 @@ accept  -200 -100
 expect  -0.001796254 -0.000898316
 
 -------------------------------------------------------------------------------
-operation +proj=murd1   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=murd1   +a=6400000    +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3428,7 +3428,7 @@ Murdoch II
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=murd2   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=murd2   +ellps=GRS80  +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3451,7 +3451,7 @@ accept  -200 -100
 expect  -0.001796356 -0.000897888
 
 -------------------------------------------------------------------------------
-operation +proj=murd2   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=murd2   +a=6400000    +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3481,7 +3481,7 @@ Murdoch III
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=murd3   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=murd3   +ellps=GRS80  +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3504,7 +3504,7 @@ accept  -200 -100
 expect  -0.001796254 -0.000898316
 
 -------------------------------------------------------------------------------
-operation +proj=murd3   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=murd3   +a=6400000    +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3533,7 +3533,7 @@ Natural Earth
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=natearth   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=natearth   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3562,7 +3562,7 @@ Natural Earth 2
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=natearth2   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=natearth2   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3591,7 +3591,7 @@ Nell
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=nell   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=nell   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3620,7 +3620,7 @@ Nell-Hammer
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=nell_h   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=nell_h   +a=6400000 
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3649,7 +3649,7 @@ Nicolosi Globular
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=nicol   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=nicol   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3757,7 +3757,7 @@ New Zealand Map Grid
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=nzmg   +ellps=GRS80  +lat_1=0.5 +lat_2=2
+operation +proj=nzmg   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -3933,7 +3933,7 @@ Oblated Equal Area
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=oea   +a=6400000    +lat_1=0.5 +lat_2=2 +n=1 +m=2 +theta=3
+operation +proj=oea   +a=6400000 +n=1 +m=2 +theta=3
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4065,7 +4065,7 @@ Ortelius Oval
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=ortel   +a=6400000    +lat_1=0 +lat_2=2
+operation +proj=ortel   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4242,7 +4242,7 @@ Perspective Conic
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=pconic   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=pconic   +ellps=GRS80  +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4265,7 +4265,7 @@ accept  -200 -100
 expect  -0.001796356 -0.000897965
 
 -------------------------------------------------------------------------------
-operation +proj=pconic   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=pconic   +a=6400000    +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4294,7 +4294,7 @@ Patterson Cylindrical
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=patterson   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=patterson   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4323,7 +4323,7 @@ Polyconic (American)
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=poly   +ellps=GRS80  +lat_1=0.5 +lat_2=2
+operation +proj=poly   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4346,7 +4346,7 @@ accept  -200 -100
 expect  -0.001796631 -0.000904369
 
 -------------------------------------------------------------------------------
-operation +proj=poly   +R=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=poly   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4375,7 +4375,7 @@ Putnins P1
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=putp1   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=putp1   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4404,7 +4404,7 @@ Putnins P2
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=putp2   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=putp2   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4433,7 +4433,7 @@ Putnins P3
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=putp3   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=putp3   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4462,7 +4462,7 @@ Putnins P3'
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=putp3p   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=putp3p   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4491,7 +4491,7 @@ Putnins P4'
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=putp4p   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=putp4p   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4520,7 +4520,7 @@ Putnins P5
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=putp5   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=putp5   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4549,7 +4549,7 @@ Putnins P5'
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=putp5p   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=putp5p   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4578,7 +4578,7 @@ Putnins P6
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=putp6   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=putp6   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4607,7 +4607,7 @@ Putnins P6'
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=putp6p   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=putp6p   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4636,7 +4636,7 @@ Quartic Authalic
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=qua_aut   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=qua_aut   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4659,7 +4659,7 @@ accept  -200 -100
 expect  -0.001796631 -0.000898315
 
 -------------------------------------------------------------------------------
-operation +proj=qua_aut   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=qua_aut   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4688,7 +4688,7 @@ Quadrilateralized Spherical Cube
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=qsc   +ellps=GRS80  +lat_1=0.5 +lat_2=2
+operation +proj=qsc   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4711,7 +4711,7 @@ accept  -200 -100
 expect  -0.001321341 -0.000610653
 
 -------------------------------------------------------------------------------
-operation +proj=qsc   +R=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=qsc   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4793,7 +4793,7 @@ Roussilhe Stereographic
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=rouss   +ellps=GRS80  +lat_1=0.5 +lat_2=2
+operation +proj=rouss   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4823,7 +4823,7 @@ Rectangular Polyconic
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=rpoly   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=rpoly   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4842,7 +4842,7 @@ Sinusoidal (Sanson-Flamsteed)
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=sinu   +ellps=GRS80  +lat_1=0.5 +lat_2=2
+operation +proj=sinu   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4865,7 +4865,7 @@ accept  -200 -100
 expect  -0.001796631 -0.000904369
 
 -------------------------------------------------------------------------------
-operation +proj=sinu   +R=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=sinu   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4895,7 +4895,7 @@ Swiss. Obl. Mercator
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=somerc   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=somerc   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4918,7 +4918,7 @@ accept  -200 -100
 expect  -0.001796631 -0.000904369
 
 -------------------------------------------------------------------------------
-operation +proj=somerc   +R=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=somerc   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4948,7 +4948,7 @@ Stereographic
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=stere   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=stere   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -4971,7 +4971,7 @@ accept  -200 -100
 expect  -0.001796631 -0.000904369
 
 -------------------------------------------------------------------------------
-operation +proj=stere   +R=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=stere   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5110,7 +5110,7 @@ Gauss-Schreiber Transverse Mercator (aka Gauss-Laborde Reunion)
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=gstmerc   +R=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=gstmerc   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5139,7 +5139,7 @@ Transverse Central Cylindrical
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=tcc   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=tcc   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5158,7 +5158,7 @@ Transverse Cylindrical Equal Area
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=tcea   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=tcea   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5221,7 +5221,7 @@ Tissot
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=tissot   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=tissot   +ellps=GRS80  +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5244,7 +5244,7 @@ accept  -200 -100
 expect  -0.001796279 0.511648325
 
 -------------------------------------------------------------------------------
-operation +proj=tissot   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=tissot   +a=6400000    +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5273,7 +5273,7 @@ Transverse Mercator
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=tmerc   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=tmerc   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5296,7 +5296,7 @@ accept  -200 -100
 expect  -0.001796631 -0.000904369
 
 -------------------------------------------------------------------------------
-operation +proj=tmerc   +R=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=tmerc   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5512,7 +5512,7 @@ Universal Polar Stereographic
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=ups   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=ups   +ellps=GRS80
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5564,7 +5564,7 @@ Urmaev Flat-Polar Sinusoidal
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=urmfps   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=urmfps   +a=6400000 +n=0.5
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5594,7 +5594,7 @@ Universal Transverse Mercator (UTM)
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=utm   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5 +zone=30
+operation +proj=utm   +ellps=GRS80 +zone=30
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5633,7 +5633,7 @@ van der Grinten (I)
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=vandg   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=vandg   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.15 mm
 accept  2 1
@@ -5670,7 +5670,7 @@ van der Grinten II
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=vandg2   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=vandg2   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.5 mm
 accept  2 1
@@ -5689,7 +5689,7 @@ van der Grinten III
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=vandg3   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=vandg3   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5708,7 +5708,7 @@ van der Grinten IV
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=vandg4   +R=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=vandg4   +R=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5728,7 +5728,7 @@ Vitkovsky I
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=vitk1   +ellps=GRS80  +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=vitk1   +ellps=GRS80    +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5751,7 +5751,7 @@ accept  -200 -100
 expect  -0.001796202 -0.000898316
 
 -------------------------------------------------------------------------------
-operation +proj=vitk1   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=vitk1   +a=6400000    +lat_1=0.5 +lat_2=2
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5780,7 +5780,7 @@ Wagner I (Kavraisky VI)
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=wag1   +a=6400000    +lat_1=0.5 +lat_2=2 +n=0.5
+operation +proj=wag1   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5809,7 +5809,7 @@ Wagner II
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=wag2   +a=6400000  +lat_1=0.5 +lat_2=2
+operation +proj=wag2   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5839,7 +5839,7 @@ Wagner III
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=wag3   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=wag3   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5868,7 +5868,7 @@ Wagner IV
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=wag4   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=wag4   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5897,7 +5897,7 @@ Wagner V
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=wag5   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=wag5   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5926,7 +5926,7 @@ Wagner VI
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=wag6   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=wag6   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5955,7 +5955,7 @@ Wagner VII
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=wag7   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=wag7   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -5974,7 +5974,7 @@ Werenskiold I
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=weren   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=weren   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -6004,7 +6004,7 @@ Winkel I
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=wink1   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=wink1   +a=6400000
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -6034,7 +6034,7 @@ Winkel II
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=wink2   +a=6400000    +lat_1=0.5 +lat_2=2
+operation +proj=wink2   +a=6400000    +lat_1=0.5
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1
@@ -6054,7 +6054,7 @@ Winkel Tripel
 ===============================================================================
 
 -------------------------------------------------------------------------------
-operation +proj=wintri   +a=6400000    +lat_1=0 +lat_2=2
+operation +proj=wintri   +a=6400000    +lat_1=0
 -------------------------------------------------------------------------------
 tolerance 0.1 mm
 accept  2 1