diff options
Diffstat (limited to 'travis/install.sh')
| -rwxr-xr-x | travis/install.sh | 155 |
1 files changed, 64 insertions, 91 deletions
diff --git a/travis/install.sh b/travis/install.sh index b0c16881..701eef21 100755 --- a/travis/install.sh +++ b/travis/install.sh @@ -13,82 +13,81 @@ if test "x${NPROC}" = "x"; then fi echo "NPROC=${NPROC}" -# Download grid files -wget https://download.osgeo.org/proj/proj-datumgrid-1.8.zip -wget "https://github.com/OSGeo/proj-datumgrid/blob/master/north-america/ntv2_0.gsb?raw=true" -O ntv2_0.gsb - # prepare build files ./autogen.sh TOP_DIR=$PWD -if [ "$SKIP_BUILDS_WITHOUT_GRID" != "yes" ]; then - - # autoconf build - mkdir build_autoconf - cd build_autoconf - ../configure - make dist-all - # Check consistency of generated tarball - TAR_FILENAME=`ls *.tar.gz` - TAR_DIRECTORY=`basename $TAR_FILENAME .tar.gz` - tar xvzf $TAR_FILENAME - cd $TAR_DIRECTORY +# autoconf build +mkdir build_autoconf +cd build_autoconf +../configure +make dist-all +# Check consistency of generated tarball +TAR_FILENAME=`ls *.tar.gz` +TAR_DIRECTORY=`basename $TAR_FILENAME .tar.gz` +tar xvzf $TAR_FILENAME +cd $TAR_DIRECTORY + +# There's a nasty #define CS in a Solaris system header. Avoid being caught about that again +CXXFLAGS="-DCS=do_not_use_CS_for_solaris_compat $CXXFLAGS" + +# autoconf build from generated tarball +mkdir build_autoconf +cd build_autoconf +../configure --prefix=/tmp/proj_autoconf_install_from_dist_all - # There's a nasty #define CS in a Solaris system header. Avoid being caught about that again - CXXFLAGS="-DCS=do_not_use_CS_for_solaris_compat $CXXFLAGS" +make -j${NPROC} - # autoconf build from generated tarball - mkdir build_autoconf - cd build_autoconf - ../configure --prefix=/tmp/proj_autoconf_install_from_dist_all +if [ "$(uname)" == "Linux" -a -f src/.libs/libproj.so ]; then +if objdump -TC "$1" | grep "elf64-x86-64">/dev/null; then + echo "Checking exported symbols..." + ${TOP_DIR}/scripts/dump_exported_symbols.sh src/.libs/libproj.so > /tmp/got_symbols.txt + diff -u ${TOP_DIR}/scripts/reference_exported_symbols.txt /tmp/got_symbols.txt || (echo "Difference(s) found in exported symbols. If intended, refresh scripts/reference_exported_symbols.txt with 'scripts/dump_exported_symbols.sh src/.libs/libproj.so > scripts/reference_exported_symbols.txt'"; exit 1) +fi +fi - make -j${NPROC} +make check +make install +find /tmp/proj_autoconf_install_from_dist_all + +/tmp/proj_autoconf_install_from_dist_all/bin/projinfo EPSG:32631 -o PROJJSON -q > out.json +cat out.json +echo "Validating JSON" +jsonschema -i out.json /tmp/proj_autoconf_install_from_dist_all/share/proj/projjson.schema.json && echo "Valid !" + +/tmp/proj_autoconf_install_from_dist_all/bin/projinfo EPSG:4326+3855 -o PROJJSON -q > out.json +cat out.json +echo "Validating JSON" +jsonschema -i out.json /tmp/proj_autoconf_install_from_dist_all/share/proj/projjson.schema.json && echo "Valid !" + +/tmp/proj_autoconf_install_from_dist_all/bin/projinfo "+proj=longlat +ellps=GRS80 +nadgrids=@foo +type=crs" -o PROJJSON -q > out.json +cat out.json +echo "Validating JSON" +jsonschema -i out.json /tmp/proj_autoconf_install_from_dist_all/share/proj/projjson.schema.json && echo "Valid !" +/tmp/proj_autoconf_install_from_dist_all/bin/projinfo @out.json -o PROJJSON -q > out2.json +diff -u out.json out2.json + +/tmp/proj_autoconf_install_from_dist_all/bin/projinfo -s EPSG:3111 -t GDA2020 -o PROJJSON -o PROJJSON -q > out.json +cat out.json +echo "Validating JSON" +jsonschema -i out.json /tmp/proj_autoconf_install_from_dist_all/share/proj/projjson.schema.json && echo "Valid !" +/tmp/proj_autoconf_install_from_dist_all/bin/projinfo @out.json -o PROJJSON -q > out2.json +diff -u out.json out2.json - if [ "$(uname)" == "Linux" -a -f src/.libs/libproj.so ]; then - if objdump -TC "$1" | grep "elf64-x86-64">/dev/null; then - echo "Checking exported symbols..." - ${TOP_DIR}/scripts/dump_exported_symbols.sh src/.libs/libproj.so > /tmp/got_symbols.txt - diff -u ${TOP_DIR}/scripts/reference_exported_symbols.txt /tmp/got_symbols.txt || (echo "Difference(s) found in exported symbols. If intended, refresh scripts/reference_exported_symbols.txt with 'scripts/dump_exported_symbols.sh src/.libs/libproj.so > scripts/reference_exported_symbols.txt'"; exit 1) - fi - fi +# Test make clean target +make clean - make check - make install - find /tmp/proj_autoconf_install_from_dist_all - - /tmp/proj_autoconf_install_from_dist_all/bin/projinfo EPSG:32631 -o PROJJSON -q > out.json - cat out.json - echo "Validating JSON" - jsonschema -i out.json /tmp/proj_autoconf_install_from_dist_all/share/proj/projjson.schema.json && echo "Valid !" - - /tmp/proj_autoconf_install_from_dist_all/bin/projinfo EPSG:4326+3855 -o PROJJSON -q > out.json - cat out.json - echo "Validating JSON" - jsonschema -i out.json /tmp/proj_autoconf_install_from_dist_all/share/proj/projjson.schema.json && echo "Valid !" - - /tmp/proj_autoconf_install_from_dist_all/bin/projinfo "+proj=longlat +ellps=GRS80 +nadgrids=@foo +type=crs" -o PROJJSON -q > out.json - cat out.json - echo "Validating JSON" - jsonschema -i out.json /tmp/proj_autoconf_install_from_dist_all/share/proj/projjson.schema.json && echo "Valid !" - /tmp/proj_autoconf_install_from_dist_all/bin/projinfo @out.json -o PROJJSON -q > out2.json - diff -u out.json out2.json - - /tmp/proj_autoconf_install_from_dist_all/bin/projinfo -s EPSG:3111 -t GDA2020 -o PROJJSON -o PROJJSON -q > out.json - cat out.json - echo "Validating JSON" - jsonschema -i out.json /tmp/proj_autoconf_install_from_dist_all/share/proj/projjson.schema.json && echo "Valid !" - /tmp/proj_autoconf_install_from_dist_all/bin/projinfo @out.json -o PROJJSON -q > out2.json - diff -u out.json out2.json +cd .. - cd .. +if [ $TRAVIS_OS_NAME != "osx" ]; then + # Check that we can retrieve the resource directory in a relative way after renaming the installation prefix + mkdir /tmp/proj_autoconf_install_from_dist_all_renamed + mv /tmp/proj_autoconf_install_from_dist_all /tmp/proj_autoconf_install_from_dist_all_renamed/subdir + LD_LIBRARY_PATH=/tmp/proj_autoconf_install_from_dist_all_renamed/subdir/lib /tmp/proj_autoconf_install_from_dist_all_renamed/subdir/bin/projsync --source-id ? --dry-run --system-directory || /bin/true + LD_LIBRARY_PATH=/tmp/proj_autoconf_install_from_dist_all_renamed/subdir/lib /tmp/proj_autoconf_install_from_dist_all_renamed/subdir/bin/projsync --source-id ? --dry-run --system-directory 2>/dev/null | grep "Downloading from https://cdn.proj.org into /tmp/proj_autoconf_install_from_dist_all_renamed/subdir/share/proj" +fi - if [ $TRAVIS_OS_NAME != "osx" ]; then - # Check that we can retrieve the resource directory in a relative way after renaming the installation prefix - mkdir /tmp/proj_autoconf_install_from_dist_all_renamed - mv /tmp/proj_autoconf_install_from_dist_all /tmp/proj_autoconf_install_from_dist_all_renamed/subdir - LD_LIBRARY_PATH=/tmp/proj_autoconf_install_from_dist_all_renamed/subdir/lib /tmp/proj_autoconf_install_from_dist_all_renamed/subdir/bin/projsync --source-id ? --dry-run --system-directory || /bin/true - LD_LIBRARY_PATH=/tmp/proj_autoconf_install_from_dist_all_renamed/subdir/lib /tmp/proj_autoconf_install_from_dist_all_renamed/subdir/bin/projsync --source-id ? --dry-run --system-directory 2>/dev/null | grep "Downloading from https://cdn.proj.org into /tmp/proj_autoconf_install_from_dist_all_renamed/subdir/share/proj" - fi +if [ "$BUILD_NAME" != "linux_gcc8" ]; then # cmake build from generated tarball mkdir build_cmake @@ -110,28 +109,6 @@ if [ "$SKIP_BUILDS_WITHOUT_GRID" != "yes" ]; then # return to root cd ../.. -fi - -# Install grid files -(cd data && unzip -o ../proj-datumgrid-1.8.zip && cp ../ntv2_0.gsb . ) - -# autoconf build with grids -mkdir build_autoconf_grids -cd build_autoconf_grids -../configure --prefix=/tmp/proj_autoconf_install_grids -make -j${NPROC} -make check -(cd src && make multistresstest && make test228) -PROJ_LIB=../data src/multistresstest -make install - -# Test make clean target -make clean - -find /tmp/proj_autoconf_install_grids -cd .. - -if [ "$SKIP_BUILDS_WITHOUT_GRID" != "yes" ]; then # There's an issue with the clang on Travis + coverage + cpp code if [ "$BUILD_NAME" != "linux_clang" ]; then @@ -147,10 +124,6 @@ if [ "$SKIP_BUILDS_WITHOUT_GRID" != "yes" ]; then make -j${NPROC} make check - # Rerun tests without grids not included in proj-datumgrid - rm -v data/egm96_15.gtx - make check - if [ "$BUILD_NAME" != "linux_clang" ]; then mv src/.libs/*.gc* src mv src/conversions/.libs/*.gc* src/conversions |